HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual page 112

●
If you are installing a 2.5-inch hard drive into either of the lower two bays (bays 5 and 6), do
the following:
◦
◦
100 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Slide the drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
Figure 6-23 Sliding the 2.5-inch Drive in the Adapter Bracket
Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket
screws through the sides of the bracket into the drive.
Figure 6-24 Securing the Drive in the Adapter Bracket