HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual page 113

◦
Install four 6-32 silver and blue isolation mounting guide screws in the adapter bracket
(two on each side of the bracket).
Figure 6-25
●
If you are installing the drive in the upper bay (bay 4), install three standard 6-32 silver
guide screws (two on the right side and one on the left side in the screw hole closest to the
power and data connectors).
Figure 6-26 Installing Standard Guide Screws
Installing Isolation Mounting Guide Screws in the Adapter Bracket
Drives 101