Expansion Card - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

4. Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
5. Repeat steps 3 and 4 to install any additional modules.
6. Replace the computer access panel.
7. Reconnect the power cord and turn on the computer.
8. Lock any security devices that were disengaged when the access panel was removed.
The computer should automatically recognize the additional memory the next time you turn on the
computer.

Expansion Card

Description
nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB
nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB
AMD Radeon HD7450 PCIe x16 graphics card, 1 GB
AMD Radeon HD6350 PCIe x16 graphics card, 512 MB
AMD FirePro 2270 PCIe x16 graphics card, 512 MB
Intel PRO/1000CT2 NIC, includes bracket
HP FireWire / IEEE 1394a PCIe x1 Card
The computer has three standard full-height PCI expansion slots, one PCI Express x1 expansion slot,
one PCI Express x16 expansion slot, and one PCI Express x16 expansion slot that is downshifted to
a x4 slot.
NOTE: You can install a PCI Express x1, x8, or x16 expansion card in the PCI Express x16 slots.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express
x16 slot that is NOT downshifted to a x4 slot.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Locate the correct vacant expansion socket on the system board and the corresponding
expansion slot on the back of the computer chassis.
(Preparation for Disassembly on page
(Access Panel on page
Spare part number
680653-001
632486-001
682411-001
637995-001
637213-001
635523-001
637591-001
75).
76).
Expansion Card 85