Speaker - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

Speaker

Description
Speaker
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front fan assembly
4. Disconnect the speaker wire from the system board connector labeled SPKR.
5. From the inside of the chassis, remove the two silver Torx T15 screws (1) that secure the
speaker to the chassis.
6. Rotate the top of the speaker downward (2), and then remove it from the chassis.
Figure 7-31
To replace the speaker, reverse the removal procedures.
156 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
(Computer Access Panel on page
(Front Fan Assembly on page
Removing the speaker
(Preparation for Disassembly on page
123).
Spare part number
645330-001
75).
147).