Adding A Waypoint - Standard Horizon Explorer GX1600 Owner's Manual

13.2 ADDING A WAYPOINT

1. Press and hold down the
Menu" appears.
2. Press the
SETUP".
3. Press the
DIRECTORY" with the
4. Press the
with the
5. Press the
6. Enter the Waypoint Name, by pressing the
/ key to select the first letter.
7. Press the
letter and to move to the second letter in the
name.
8. Repeat step 5 and 6 until the name is shown.
Press the
9. Press and hold the
coordinates of the waypoint POSITION, by pressing the
select the first digit in the Latitude.
10. Press the
second number in the position.
11. Repeat step 9 and 10 until the latitude is shown include N or S in the last
digit.
12. Press the
ing.
13. Press the
14. Press the
second number in the position.
15. Repeat step 13 and 14 until the Latitude is shown
include E or W in the last digit.
16. After all information is entered, press and hold the
soft key to store the waypoint into memory.
17. Press the
GX1600
/ key to select "WAYPOINT
soft key, then select "WAYPOINT
/
soft key, then select "ADD"
/ key.
soft key.
soft key to store the first
soft key to skip a letter if needed.
soft key, then enter the
soft key to store the first number and to move to the
soft key to select the first digit of the Longitude is blink-
/ key to select the first digit in the Longitude.
soft key to store the first number and to move to the
soft key several times to return to radio operation.
key until "Setup
key.
/ key to
Page 85