Transmitting A Group Call; Group Call Using The Individual Directory - Standard Horizon Explorer GX1600 Owner's Manual

5. Press the
6. Press the
letter of the name of the group you want to refer-
ence in the directory.
7. Press the
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters, if
you do not use all eleven characters press the
soft key to move to the next space. This
method can also be used to enter a blank space in
the name. If a mistake was made entering in the
name repeat pressing the
wrong character is selected, then press the
key to correct the entry.
9. After the eleventh letter or space has been entered, press and hold the
soft key to advance to the GROUP MMSI (Maritime Mobile Service
Identity Number) number entry.
10. Press the
digits: first digit permanently set to "0") which you
want to contact, then press the
step to the next number. Repeat this procedure until
all eight space of the MMSI number are entered.
11. If a mistake was made entering in the MMSI number repeat pressing the
soft key until the wrong number is selected, then press the
key to correct the entry.
12. To store the data entered, press and hold the
13. To enter another group address, repeat steps 5 through 12.
14. Press the

9.7.2 Transmitting a Group Call

9.7.2.1 Group Call using the Individual Directory

1. Press the
2. Press the
cel, press the
3. Press the
and the "Last Group Call" will appear.
4. Press the
want to contact.
5. Press the
key to select the operating channel you want to com-
Page 52
soft key.
/ key to scroll through the first
soft key to store the first letter in
/ key to select the second number of the MMSI (nine
soft key several times to return to radio operation.
key. The "DSC Menu" will appear.
/ key to select "GROUP". (To can-
key.)
soft key. The transceiver will beep,
/ key to select the "Group" you
soft key, then press the
soft key until the
/
soft key to
/
soft key.
GX1600
/