Adding A Waypoint - Standard Horizon Explorer GX1600E Owner's Manual

14.2 ADDING A WAYPOINT

1. Press and hold down the
Menu" appears.
Menu Menu Menu Menu
2. Press the
SETUP SETUP SETUP".
SETUP SETUP
3. Press the
DIRECTORY" with the
DIRECTORY DIRECTORY
DIRECTORY DIRECTORY
4. Press the
with the
5. Press the
6. Enter the Waypoint Name, by pressing the
/ key to select the first letter.
Note: The GX1600E assign a name of the
Waypoint with "WPT xxx
7. Press the
letter and to move to the second letter in the
name.
8. Repeat step 6 and 7 until the name is shown. Press
the soft key to skip a letter if needed.
9. Press and hold the
waypoint POSITION, by pressing the
in the Latitude.
10. Press the
second number in the position.
11. Repeat step 9 and 10 until the latitude is shown include N or S in the last
digit.
12. Press the
ing.
13. Press the
14. Press the
second number in the position.
15. Repeat step 13 and 14 until the Latitude is shown
include E or W in the last digit.
16. After all information is entered, press and hold the
soft key to store the waypoint into memory.
17. Press the
GX1600E
/ key to select "WAYPOINT
soft key, then select "WAYPOINT
/
soft key, then select "ADD
/ key.
soft key.
WPT xxx" automatically.
WPT xxx WPT xxx
WPT xxx
soft key to store the first
soft key, then enter the coordinates of the
soft key to store the first number and to move to the
soft key to select the first digit of the Longitude is blink-
/ key to select the first digit in the Longitude.
soft key to store the first number and to move to the
soft key several times to return to radio operation.
key until "Setup
Setup Setup Setup
Setup
WAYPOINT WAYPOINT
WAYPOINT WAYPOINT
WAYPOINT WAYPOINT WAYPOINT WAYPOINT
key.
ADD" ADD ADD
ADD
/ key to select the first digit
Page 89