10.7 UNIT OF MEASURE
Allows Navigation and AIS displays to be shown in "Knot", "Mile/Hour" or "Kilo-
Meter/Hour" (for speed) and "Nautical Mile" or "Kilo-Meter" (for distance).
A GPS must be connected to the radio to be able to show SPEED and
DISTANCE.
1. Press and hold down the
appears, then select "GENERAL SETUP" with the
/
key.
2. Press the
key to select "UNIT OF MEASURE".
3. Press the
4. Press the
TANCE" which you wish to change.
5. Press the
key to select desired unit. Available selections are
KTS (knot), MPH (Mile/Hour), or KMH (Kilo-Meter/
Hour) for speed, and NM (Nautical Mile), SM (Stat-
ute Mile), or KM (Kilo-Meter) for distance.
6. Press the
ting.
7. Press the
radio operation.
Page 72
key until "Setup Menu"
soft key, then press the
soft key.
/
key to select "SPEED" or "DIS-
soft key, then press the
soft key to store the selected set-
soft key several times to return to
NOTE
/
/
GX1600