9.12 DSC TEST
This function is used to contact another DSC equipped vessel to ensure the
DSC functions of the radio are operating.
To use this feature, the radio you will be transmitting the test call to
needs to have the DSC Test feature.
To perform the DSC test you will need to enter a MMSI of another vessel into
the Individual directory or manually enter in the MMSI using the procedure
below.
9.12.1 Programming MMSI into Individual Directory
Refer to section "9.5.1 Setting up the Individual / Position Call Directory".
9.12.2 DSC Test Call by using Individual Directory
1. Press the
pear.
2. Press the
then press the
3. Press the
and press the
4. Press the
test call to the other vessel.
After the radio receive a Test Call reply from ves-
sel that was called, the radio will ring and show
TEST ACK display, which confirms the radio you
called received the test call.
Page 66
key. The "DSC Menu" will ap-
/
key to select "DSC TEST",
soft key.
/
key to select the Ship name
soft key.
soft key to transmit the DSC
NOTE
NOTE
GX1600