Table of Contents
Advertisement
14.2 ADDING A WAYPOINT
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " WAYPOINT
SETUP ".
3. Press the
" WAYPOINT DIRECTORY " with the CH knob.
4. Press the
with the CH knob.
5. Press the
6. Enter the waypoint name by rotating the CH
knob to select the first letter.
7. Press the
letter and to move to the second letter in
the name.
8. Repeat step 6 and 7 until the name is
shown. Press the
letter if needed.
9. Press and hold the
enter the coordinates of the waypoint posi-
tion by rotating the CH knob to select the
first digit in the latitude.
10. Press the
second number in the position.
11. Repeat step 9 and 10 until the latitude is shown including N or S in the
last digit.
12. Press the
ing.
13. Rotate the CH knob to select the first digit in the longitude.
14. Press the
second number in the position.
15. Repeat step 13 and 14 until the longitude is shown including E or W in
the last digit.
16. After all information is entered, press and hold the
store the waypoint into memory.
17. Press the
Page 114
key until " Setup
CALL
MENU
soft key, then select
soft key, then select " ADD "
soft key.
soft key to store the first
soft key to skip a
soft key, then
soft key to store the first number and to move to the
soft key to select the first digit of the longitude is blink-
soft key to store the first number and to move to the
soft key three times to return to radio operation.
-Waypoint Directry-
Mark Position
ADD
Edit
Delete
SELECT
QUIT
-Waypoint Input-
WPT Name:Fishing PT
ID:123456789
Position: 33 36.520N
118 10.120W
QUIT
ENT
BACK
soft key to
GX2000/GX2150
Advertisement
Table of Contents
