Enable/Disable Auto Dsc Polling - Standard Horizon Explorer GX1600 Owner's Manual

6. Repeat steps 4 and 5 for CALL 2, CALL 3 and CALL
4 entries.
7. When finished, press the
ous times to exit to the radio mode.

9.11.3 Enable/Disable Auto DSC Polling

1. Press the
pear.
2. Press the
POLLING", then press the
3. Press the
then press the
4. Select "START" to enable transmissions to the
stations or "STOP" to disable transmissions to
stations.
5. Press the
6. Press the
the radio mode.
When the radio receives position reports from a
called vessel the display will show the image to
the right also NMEA 0183 DSC and DSE sen-
tences are outputted to a connected GPS Chart
Plotter or PC.
GX1600
key. The "DSC Menu" will ap-
/ key to select "AUTO POS
/ key to select the "ACTIVATION",
soft key.
soft key.
soft key numerous times to exit to
soft key numer-
soft key.
NOTE
Page 65