Transmitting An Individual Call; Individual Call Using The Individual Directory - Standard Horizon Explorer GX1600 Owner's Manual

or "Group" if you wish to disable the Group call ringer,
then press the
6. Press the
7. Press the
ting, then press the
tion.
To re-enable the ringer, repeat the above procedure, pressing the
key to select "On" in step "6" above.

9.5.5 Transmitting an Individual Call

This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.

9.5.5.1 Individual Call using the Individual Directory

1. Press the
2. Press the
cancel, press the
3. Press the
4. Press the
you want to contact.
To ease making Individual calls, the GX1600
will show the NAME of last Individual call
transmitted.
5. Press the
key to select the operating channel you want to com-
municate on, then press the
channel is not shown in the list, press the
soft key, then press the
operating channel you want to communicate on, then
press the
6. Press the
DSC signal.
7. When an individual call acknowledgment is
received, the established channel is automati-
cally changed to the channel selected in step
5 above and a ringing tone sounds.
8. Press the
make sure it is not busy, then press the microphone's PTT switch and talk
into the microphone to the other vessel.
Page 46
soft key.
/ key to select "Off".
soft key to store the selected set-
soft key several times to return to radio opera-
key. The "DSC Menu" will appear.
/ key to select "INDIVIDUAL". (To
soft key.)
soft key.
/ key to select the "Individual"
NOTE
soft key, then press the
/
soft key.
soft key to transmit the individual
soft key to listen to the channel to
/
soft key. If the
key to select the
/
GX1600