Table of Contents
Advertisement
11.3 SCAN TYPE
This selection is used to select the scan mode between "Memory Scan" and
"Priority Scan". The default setting is Priority Scan.
1. Press and hold down the
appears.
2. Press the
SETUP".
3. Press the
with the
4. Press the
5. Press the
or "MEMORY SCAN".
6. Press the
ting.
7. Press the
radio operation.
11.4 SCAN RESUME
This selection is used to select the time the GX1600 waits after a transmission
ends before the radio start to scan channels again. The default setting is 2
seconds.
1. Press and hold down the
appears.
2. Press the
SETUP".
3. Press the
SUME" with the
4. Press the
5. Press the
sume time, default is 2 seconds. The resume time
can be set to "1SEC" through "5SEC", or "OFF". In the
"OFF" selection, the scanner will resume after the
other station stops transmitting (carrier drops).
6. Press the
ting.
7. Press the
radio operation.
Page 78
/
key to select "CH FUNCTION
soft key, then select "SCAN TYPE"
/
key.
soft key.
/
key to select "PRIORITY SCAN"
soft key to store the selected set-
soft key several times to return to
/
key to select "CH FUNCTION
soft key, then select "SCAN RE-
/
key.
soft key.
/
key to select the desired re-
soft key to store the selected set-
soft key several times to return to
key until "Setup Menu"
key until "Setup Menu"
GX1600
Hide quick links:
Advertisement
Table of Contents
