Turning The Printer On And Off - Xerox WorkCentre 7220 User Manual

Turning the Printer On and Off

This printer has two power switches. The main power switch located behind the front door controls the
main power to the printer. The secondary power switch on the top of the printer controls power to the
printer electronic components, and initiates a software-controlled shutdown when turned off. Using the
secondary power switch to turn on and off the printer is the preferred method. To operate the printer,
turn on both switches. First turn on the main power switch, then turn on the secondary power switch.
CAUTIONS:
• To prevent a printer malfunction or damage to the internal hard drive, turn off the
secondary power switch first. Wait 10 seconds after the touch screen goes dark, then
turn off the main power switch.
• Do not plug or unplug the power cord while the power switch is in the On position.
To turn on the printer:
1. Open the front door.
2. Turn on the main power switch.
WorkCentre 7220/7225 Multifunction Printer
Installation and Setup
39
User Guide