Printing Takes Too Long - Xerox WorkCentre 7220 User Manual

Troubleshooting
Probable Causes
A network configuration problem exists.
A system error occurred.

Printing Takes Too Long

Probable Causes
The printer is set to print on a paper type that
requires slower printing.
The printer is in Energy Saver mode.
The way the printer was installed on the
network could be an issue.
The job is complex.
190 WorkCentre 7220/7225 Multifunction Printer
User Guide
Solutions
Unplug the network cable. If the problem is resolved, contact your
network administrator to reconfigure your network installation.
Contact your Xerox representative with the error code and message.
Check the control panel fault history. For details, see
and Alert Messages on the Control Panel
Solutions
Certain paper types, like heavyweight paper and transparencies,
take more time to print. Ensure that the print driver and control
panel are set to the proper paper type.
Wait. It takes time for printing to start when the printer is coming
out of Energy Saver mode.
• Determine if a print spooler or a computer sharing the printer is
buffering all print jobs and then spooling them to the printer.
Spooling can slow print speeds.
• To test the speed of the printer, print multiple copies of an
information page, such as a demo page. If the page prints at
the rated speed of the printer, you could have a network or
printer installation issue. For additional help, contact the system
administrator.
Wait. No action needed.
Viewing Fault
on page 231.