Shifting The Image - Xerox WorkCentre 7220 User Manual

Copying
Note: You must use the document glass to make copies from books, magazines, or other bound
documents. Do not place bound originals in the document feeder.
To set up book copying:
Press the Services Home button, then touch Copy.
1.
Touch the Layout Adjustment tab, then touch Book Copying.
2.
3. On the Book Copying screen, select an option:
− Off copies both pages of an open book as one image on a single sheet of paper.
− Both Pages copies the left and the right pages of an open book onto two sheets of paper. If
Binding Edge Erase is required, touch the arrows to erase up to 50.8 mm (2 in.).
− Left Page Only copies only the left page of an open book on a single sheet of paper. If Binding
Edge Erase is required, touch the arrows to erase up to 25.4 mm (1 in.).
− Right Page Only to copy only the right page of an open book on a single sheet of paper. If
Binding Edge Erase is required, touch the arrows to erase up to 25.4 mm (1 in.)
4. Touch OK.

Shifting the Image

You can change the placement of an image on the copy page. This is useful if the image is smaller than
the page size. Originals must be positioned as follows for image shift to work correctly:
• Document Feeder: Position originals face up, long edge entering the feeder first.
• Document Glass: Position originals face down, in the back-left corner of the document glass, long
edge to the left.
To change the placement of the image:
1. Press the Services Home button, then touch Copy.
Touch the Layout Adjustment tab, then touch Image Shift.
2.
3. On the Image Shift screen, select an option:
Auto Center centers the image on the page.
−
Margin Shift allows you to specify the position of the image. To specify the amount of shift for
−
Side 1, touch the Up/Down and Left/Right arrows. To specify the amount of shift for Side 2,
touch the Up/Down and Left/Right arrows, or select Mirror Side 1.
Note: You can use preset values that were previously saved by the system administrator. Touch
Presets in the lower left corner of the screen, and select a preset from the drop-down menu.
4. Touch OK.
Erasing the Edges of Copies
You can erase content from the edges of your copies by specifying the amount to erase on the right, left,
top, and bottom edges.
To erase edges on copies:
106 WorkCentre 7220/7225 Multifunction Printer
User Guide