Document Requirements; Problem Documents; Scanned Area Of A Document - Canon FAX-L200? FAX-L280 User Manual

Document Requirements

The documents you load in the ADF for sending and copying must meet the following
requirements:
Size
(W × L)
Quantity
Thickness
Weight
I Problem Documents
• To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Torn paper
• Remove all fasteners (staples, paper clips, etc.) before loading the document in the
ADF.
• Make sure any glue, ink, or correction fluid on the document is completely dry before
loading it in the ADF.
• If you have a document that will not feed properly in the ADF, make a photocopy of
the document and load the copy instead.
• If you will be sending a document that you have printed from your FAX, be sure to
use face-down delivery when printing that document (1 p. 5-4).

Scanned Area of a Document

The shaded area shows the scanned
area of a document. Make sure your
document's text and graphics fall within
this area.
* 75 g/m 2 paper
4-2
Document Handling
One-page document
× Approx. 1 m
Max. 216 mm
Min. 148 × 105 mm
1 sheet
0.06 to 0.23 mm
35 to 240 g/m
2
Multipage document of the
same thickness and weight
Max. 216 × 355.6 mm
Min. 148 × 105 mm
Max. 20 A4- or letter-size sheets*
Max. 10 legal-size sheets*
0.06 to 0.13 mm
40 to 90 g/m
– Carbon paper or carbon-backed paper
– Coated paper
– Onion skin or thin paper
A4
MAX. 3 mm
2
MAX. 4 mm
MAX. 4 mm
MAX. 3 mm
Chapter 4