Manual Sending Via The Handset - Canon FAX-L200? FAX-L280 User Manual

3
Press Start/Copy to begin scanning
for sending, or if you used speed
dialling, wait a few seconds for the
FAX to begin scanning automatically.
• If you do not want the FAX to begin
scanning automatically after a few
seconds, disable the TIME OUT setting
(1 p. 14-6).
• To cancel sending once dialling has
started, press Stop then T (1 p. 7-8).
• If the number you are calling is busy,
the FAX redials the number
automatically after a few minutes
(1 p. 7-9).
n
• You can register up to 20 different sending operations for memory sending.
• The document is automatically deleted from memory after sending. This occurs even if
an error prevents complete transmission of the document.

Manual Sending Via the Handset

Manual sending via the handset allows you to talk to the other party before sending a
document. This method is useful if the other party must manually activate their fax
machine to receive a fax.
n
For this mode, you need to connect the optional handset or a telephone to your FAX
(1 p. 2-6).
Follow this procedure to send a document using manual sending via the handset:
1
Make sure you have connected the
optional handset or a telephone to the
FAX (1 p. 2-6).
2
Load the document, face down in the
ADF (1 p. 4-3).
• To adjust the resolution and contrast,
see pp. 7-2, 7-3.
3
Press Hook.
• You can also lift the handset instead of
pressing Hook.
7-6
Sending Faxes
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
TEL=
Chapter 7