STEP 3:
Please browse Server Setting menu and insert the proxy server IP address (or domain
name) information obtained from your service provider.
STEP 4:
Repeat the same configuration steps on WATA B, and check the machine registration status,
make sure the registrations are completed.
Test the scenario:
To verify the VoIP communication, please
1) Pick up the telephone on WATA A
2) Press the keypad 2002 shall be able to connect to the WATA B
3) Then the telephone set in WATA B should ring.
4) Please repeat the same dialing steps on WATA B to establish the first voice communication
from WATA A
Make a three - way conference call
1) Make a call to the first party.
2) "Flash hook" to hold the call.
3) Dial " ** ", and then you will hear a dial tone.
4) Make the other call to the third party.
5) Dial " *3 " to connect the two party calls for conferencing.
Note
If you want to make a PSTN phone call, press the "*" key to switch
to PSTN mode.
70