Table of Contents
Advertisement
AP-Client Only Mode
In this mode the WATA is used to access the Wireless Service Provider network by connecting
wirelessly to the remote (Outdoor AP). The user can access the PSTN network by connecting to the
FXS ports or accessing the internet by connecting the PCs to the 2 Ethernet ports.
Note
When WATA operate in AP-Client Mode, the WAN and LAN RJ-45
interface will be configured as a 2 port switch for connecting
with 2 PCs for access wireless network
WLAN Mode
Remote AP SSID
Remote AP KEY
W-LAN Channel
W-LAN IP Assignment
For wireless connected type 802.11 B/G mixed/ 802.11b only /
802.11G only
Define the same as your Wireless Router uses.
Enter the remote AP Authorization Key (WPA-PSK / WPA2-PSK /
WPAPSK ,WPA2PSK Mix Mode to Show)
Define the same as your Wireless Router uses.
1. DHCP client
2. Static IP Address
25
Advertisement
Table of Contents
