Table of Contents
Advertisement
Enable
Trigger Port
Trigger Type
Public Port
Public Type
Action
Packet Filter
Controlling access to a network by analyzing the incoming packets and letting they pass or halting them
based on the IP addresses of the source.
(Can be useful for residential screening as well – for parental screening or other)
Enable / Disable the port trigger, default setting is Disable
This is the port used to trigger the application. It can be either a single port
or a range of ports
This is the protocol used to trigger the special application
This is the port number on the WAN side that will be used to access the
application. You may define a single port or a range of ports. You can use a
comma to add multiple ports or port ranges.
This is the protocol used for the special application.
Insert a new Port Trigger or update a specified Port Trigger.
36
Advertisement
Table of Contents
