Table of Contents
Advertisement
Enable/Disable the static route
Enable
Indicates the type of route as follows, Host for local connection and Net
Type
for network connection
Defines the base IP address (Network Number) that will be compared
with the destination IP address (after an AND with NetMask) to see if this
Target
is the target route
The subnet mask that will be AND'd with the destination IP address and
NetMask
then compared with the Target to see if this is the target route.
The IP address of the next hop router that will be used to route traffic for
this route. If this route is local (defines the locally connected hosts and
Gateway
Type = Host) then this IP address MUST be the IP address of the router
Action
Insert a new Static Router entry or update a specified entry
32
Advertisement
Table of Contents
