Table of Contents
Advertisement
Access Policy: in WATA security, an access control list is a list of "allow all / Reject all" to an MAC.
Access Control List：MAX MAC List：64.
DHCP Server Setting
DHCP stands for Dynamic Host Control Protocol. The DHCP server gives out IP addresses when a
device is starting up and request an IP address to be logged on to the network. The device must be set
as a DHCP client to "Obtain the IP address automatically". By default, the DHCP Server is enabled in the
unit. The DHCP address pool contains the range of the IP address that will automatically be assigned to
the clients on the network.
An advantage of using DHCP is that the service assigns addresses dynamically. The DHCP Server
returns addresses that are no longer in use to the IP addresses pool so that the server can reallocate
them to other machines in the network. If you disable this DHCP, you would have to manually configure
IP for new computers, keep track of IP addresses so that you could reassign addresses that clients
aren't using, and reconfigure computers that you move from one subnet to another. The DHCP Static
MAP table lists all MAC and IP address which are active now.
When you enable the DHCP server:
30
Advertisement
Table of Contents
