Table of Contents
Advertisement
Installation
1 Connect the 12V DC IN to the power outlet with power adaptor.
2 Connect Line to PSTN.
3 Connect Phone to a telephone jack with the RJ-11 analog cable.
Connecting to a PC
1 Connect the Ethernet cable (with RJ-45 connector) to any LAN port.
2 Connect the other end of the Ethernet cable to your PC's installed network interface card (NIC).
Connecting to an External Ethernet Hub or Switch
1 Connect the Ethernet cable (with RJ-45 connector) to WAN port.
2. Connect the other end of the Ethernet cable to DSL/Cable modem or the external Ethernet hub or
switch.
Administration Interface
PLANET WATA provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
To start WATA web configuration, you must have one of these web browsers installed on computer for
management
•
Microsoft Internet Explorer 6.0 or higher with Java support
Default LAN interface IP address of WATA is 192.168.0.1. You may now open your web browser, and
insert
http://192.168.0.1
in the address bar of web browser to logon WATA web configuration page.
WATA will prompt for logon username/password, please enter: root / null (no password) to continue
machine administration.
12
Advertisement
Table of Contents
