Table of Contents
Advertisement
Enable
WAN Port
Protocol
LAN IP
LAN Port
Action
Port Trigger
Some applications require multiple connections, such as Internet gaming, video conferencing,
Internet telephony and others. These applications have difficulties working through NAT (Network
Address Translation). If you need to run applications that require multiple connections, specify the port
normally associated with an application in the "Trigger Port" field, select the protocol type as TCP
(Transmission Control Protocol) or UDP (User Datagram Protocol), then enter the public ports
associated with the trigger port to open them for inbound traffic.
Enable/Disable the virtual server mapping, default setting is Disable.
The port number on the WAN side that will be used to access the
virtual service. Enter the WAN Port number, e.g. enter 80 to represent
the Web (http server), or enter 25 to represent SMTP (email server).
Note: You can specify maximum 32 WAN Ports
The protocol used for the virtual service. Select a protocol type is TCP
or UDP
The server computer in the LAN network that will be providing the
virtual services. Enter the IP address of LAN
The port number of the service used by the Private IP computer. Enter
the LAN port number
Insert a new WAN port or update a specified WAN port
35
Advertisement
Table of Contents
