Table of Contents
Advertisement
SNMP (For AP / WISP & AP mode)
The simple network management protocol (SNMP) forms part of the internet protocol suite as
defined by the Internet Engineering Task Force (IETF). SNMP is used by network management
systems to monitor network-attached devices for conditions that warrant administrative attention. It
consists of a set of standards for network management, including an Application Layer protocol, a
database schema, and a set of data objects.
Enable
SNMP Read Community
SNMP Write Community
SNMP Trap Host
SNMP Trap Community
Enable/Disable the SNMP service, default setting is Disable
(Support SNMP version 1 or SNMP version 2c)
SNMP Read Community string so that "EPICenter" can retrieve
information.(default :public)
Specifies the name of the SNMP write community to which the printer
device that this actual destination represents belongs.(Default :private)
Defines an SNMP trap host to which "AppCelera" will send trap
messages (Default address is empty)
The SNMP trap community name. The community name functions as a
password for sending trap notifications to the target SNMP manager
(Default：public)
41
Advertisement
Table of Contents
