Table of Contents
Advertisement
Internet Setting Setup
WAN Setting
NAT Mode
Bridge Mode
WAN Port IP
Assignment
AP Setting
For configuring correctly the WLAN port in client mode. the below instructions will provide a quick
start. It is advised if possible to use the simplest network settings for first try.
For making sure the WATA is connecting to your wireless router (AP). You need to set up the
following: SSID, Frequency Channel, Authentication method and Encryption parameters
(Type/Encryption length/Keys.)
Network Address Translation (NAT) serves connecting multiple
computers to the Internet using one IP address.
Bridge mode serves to connect a local area network (LAN / Wireless)
to another local area network that uses the same protocol.
Three methods are available for Internet Access. Static IP / DHCP /
PPPoE type for your select .you should refer to section 3.1 "WAN
Setting" in user menu.
15
Advertisement
Table of Contents
