Table of Contents
Advertisement
SIP Port Number
Session Timer
Media Port Start
Media Port End
RTCP Port
Transport
UDP
Assign the SIP port number of Telephone adapter. Its range is 1024 to
65535, default setting is 5060
SIP session refresh time interval. The time interval in which the phone
periodically refresh SIP sessions by sending repeated INVITE or Update
request, depending on session type. Its range is 1 to 65535, default setting
is 1800 seconds
The starting range of port for RTP. Port number for initial of sending RTP
packet. Its range is 1024 to 65535, default setting is 5000
The ending range of port for RTP. Its range is 1024 to 65535, default
setting is 5050
The Real Time Transport Control Protocol is based on the periodic
transmission of control packets to all participants in the session, using the
same distribution mechanism as the data packets. The underlying
protocol must provide multiplexing of the data and control packets. Its
range is 1024 to 65535, default setting is 5060
Assigns the default SIP transport protocol
Offering instead a direct way to send and receive datagram over an IP
network. It's used primarily for broadcasting messages over a network.
Here the UDP is a default setting
44
Advertisement
Table of Contents
