Cancelling an automatic station
seek tuning
To cancel the automatic station
seek tuning:
Press the ESC button A.
➜
The automatic station seek tun-
ing stops. The previously played
station is played.
Setting stations manually
To set a station manually:
In the radio display, select the
➜
"Tune" menu.
The tuning menu with frequency
band A, station name B and fre-
quency C is displayed.
B
B
BBC
BBC
I 92
I 92
I
I
C
C
Turn the menu button until the
➜
frequency band A is highlighted
and press the OK button =.
The frequency band A is high-
lighted in red.
Turn the menu button < to the
➜
left or the right.
You are listening to the current
reception frequency.
As soon as a station has been lo-
cated, it is played. The station name
appears on the display after a few
seconds if the station broadcasts
RDS information and you activated
Tune
Tune
93
93
I
I
94 I
94 I
A
A
the display of station names (see
p. 22).
You can now do the following:
•
Continue listening to the station
by pressing the OK button =. To
subsequently store this station,
see p. 38,
•
return to the previous station by
pressing the ESC button A,
•
search for additional stations by
turning the menu button < to
the left or right.
Scanning receivable
stations (SCAN)
You can sequentially scan all receiv-
able stations for 10 seconds.
To start the SCAN:
In the radio display, select the
➜
"Options" menu.
The Options menu of the radios
is displayed.
Start scan
Start scan
In the Options menu, select and
➜
confi rm the "Start scan" menu
item.
The radio searches for stations in
the current frequency band. The
display shows "SCAN".
As soon as a station has been lo-
cated, it is played for 10 seconds.
The station name appears on the
display after a few seconds if the
station broadcasts RDS information
and you activated the display of sta-
tion names (see p. 22).
Operating the radio
Options
Options
Start T-Store
Start T-Store
37