Displaying The Calculated Route - Blaupunkt TravelPilot Rome Europe NAV56E Operating And Installation Instructions

Operating the navigation system
Searching for a radio station
during destination guidance
During destination guidance, you
can initiate the automatic station
seek tuning as follows:
Press the OK button = for ap-
➜
prox. 2 seconds.
The radio searches for the next
station in the current frequency
band in the forward direction.
In the process, the settings in
the menu "Tuner" (see p. 24),
for traffi c announcements (TA,
see p. 31) and for TMC traffi c
announcements (see p. 32) are
incorporated.
As soon as a station is located, the
automatic seek tuning stops and the
located station is played. The sta-
tion name appears on the display
after a few seconds if the station
broadcasts RDS information and
you activated the display of station
names (see p. 22).
You can now store this station (see
p. 38) or restart the automatic sta-
tion seek tuning.
Cancelling destination guidance
To cancel destination guidance:
Press the ESC button A while
➜
destination guidance is dis-
played.
The following confi rmation dia-
logue appears.
Do you really want to Do you really want to
cancel route guidance? cancel route guidance?
Yes Yes
66
Select and confi rm "Yes" to can-
➜
cel the destination guidance.
The current position is shown on
the navigation display. You do not
receive any additional turn-by-
turn directions.
Displaying the calculated
route
You can display the complete calcu-
lated route as follows:
Note:
You can display the route only if
you entered a destination and
the route was calculated.
➜ Press the
prox. 2 seconds.
Or:
➜ Mark and confi rm the "Options"
menu in the navigation display.
The Options menu of the naviga-
tion system appears.
Traffic ahead Traffic ahead
Route list Route list
➜ In the "Options" menu, mark and
confi rm the "Route list" menu
item.
Navigation Navigation
No No
button B for ap-
Options Options
Route options Route options