Bypassing A Traffic Jam During Navigation - Blaupunkt TravelPilot DX-R4 Operating Instructions Manual

INTRODUCTION NAVIGATION

Bypassing a traffic jam during navigation

Alongside the feature for automatically bypassing traffic jams with the aid of the
dynamic navigation feature, the TravelPilot also gives you the option of manual-
ly entering traffic jams or blocked sections of road during an active navigation
session.
To bypass a traffic jam, proceed as follows:
Press the traffic jam button 7.
1
The traffic jam menu is displayed.
2 Open the TRAFFIC AHEAD menu item.
The traffic jam bypass menu opens. The selection marker is positioned
over the TO item.
Press the right knob/pushbutton ;.
3
Use the right knob/pushbutton ; to move the selection marker to the
4
FROM item.
Use the right knob/pushbutton ; to set the distance from your current
5
position at which the traffic jam bypass should begin.
Use the right knob/pushbutton ; to move the selection marker to the TO
6
item.
Use the right knob/pushbutton ; to set the distance from your current
7
position at which the traffic jam bypass should end.
8 Select OK and
press the right knob/pushbutton ;.
9
The navigation menu opens again and the route is recalculated. NEW
CALC appears in the title line whilst the route is being calculated.
RADIO MODE CD MODE CD CHANGER SETUP
SETTINGS
MODIFY ROUTE
TRAFFIC AHEAD
TRAFFIC AHEAD
FROM:
TO:
CLEAR
INDEX
46
3.1mi
7.0mi
OK