Ozone Release; Maintenance Safety; Printer Symbols - Xerox Color 550 User Manual

Safety

Ozone Release

During print operation, this printer produces a small quantity of ozone. The amount of
ozone released is not large enough to harm anyone adversely. However, install the printer
in a well-ventilated room. Be sure the room where the product is being used has adequate
ventilation, especially if you are printing a high volume of materials, or if the product is
being used continuously over a long period.
For more information about ozone, locate the Xerox publication Facts About Ozone at
http://www.xerox.com/downloads/usa/en/e/ehs_ozone_2005.pdf.
For more information in the United States and Canada, go to
www.xerox.com/environment. In other markets, contact your local Xerox representative
or go to www.xerox.com/environment_europe.

Maintenance Safety

Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
Do not use aerosol cleaners. Clean with a dry lint-free cloth only.
Do not burn any consumables or routine maintenance items. For information on
Xerox supplies recycling programs, go to www.xerox.com/gwa.

Printer Symbols

Warning
This symbol alerts users to areas of the product where there is the possibility of personal
injury. A warning indicates that an injury or loss of life may occur if an operating or
maintenance procedure, practice, or condition is not strictly observed.
Hot Warning
This symbol alerts users to areas of the product where there are heated surfaces, which
should not be touched.
Caution
This symbol alerts users to areas of the equipment, which require special attention to
avoid the possibility of personal injury or damage to the equipment. A caution indicates
that damage or destruction to hardware, software, or your data could occur if an
operating or maintenance procedure, practice, or condition is not strictly observed.
1-6 Xerox Color 550/560/570 Printer
®
User Guide