Standard/Booklet Maker Finisher
Z-Fold
A Z-Fold has two folds that are folded in opposite directions, resulting in a type of fan
fold.
Z-Fold Half Sheet (shown here with 3-hole punch)
As with a regular Z-Fold, it has two folds that are folded in the opposite directions. The
difference between a regular Z-Fold and a Z-Fold Half Sheet is that the Z-Fold Half Sheet
is not folded in two equal folds. The two folds are unequal which allows one edge of the
Z-Fold Half Sheet to have a longer edge, and the longer edge allows for stapling or hole
punching.
Loading paper/tabs in Tray 8
(Post-Process Inserter)
1. If necessary, remove any remaining media that is currently loaded in Tray 8.
2. Hold the center of the paper guides and slide them to their desired paper size.
13-6
Xerox
Color 550/560/570 Printer
®
User Guide