Optional Accessories - Xerox Color 550 User Manual

Optional Accessories

Finishing Devices
Advanced Finisher
The Right Top Tray is used for stacked output, and can receive up to 500 sheets of
paper. The Stacker is used for offset and/or stapled output, and can hold up to 3000
sheets.
Professional Finisher with Booklet Maker
The Right Top Tray is used for stacked output, and can receive up to 500 sheets of
paper. The Right Center Tray is used for offset and/or stapled output, and can hold
up to 1500 sheets. Both trays can be used for hole punched output (optional). The
Bottom Finisher Tray is used for receiving saddle-stapled booklets.
Standard Finisher
This finisher provides a range of finishing/folding options. The required Interace
Module acts as a communication device and paper path between the printer and the
Light Production C Finisher.
Tray 8 (Post Process Inserter) is standard on this device and is used to load paper
that serves as separators and covers. Tray 8 holds up to 200 sheets.
The Top Tray is used for stacked output and can receive up to 500 sheets of 20 lb.
(80 gsm) paper.
The Stacker Tray is used for offset and/or stapled output and can hold up to 3000
sheets of 20 lb. (80 gsm) paper.
The Bottom Tray is the optional Booklet Maker Tray and is used for receiving
saddle-stapled booklets.
The optional Folder is used for C-folding and Z-folding of 8.5 x 11 in./A4 output and
11 x 17 in./A3.
Booklet Maker Finisher
Contains all the features of the Standard Finisher as well as creates saddle-stitched
booklets of up to 25 sheets and from 8.5 x 11 in./A4 or 12 x 18 in./SRA3.
Note
The Interface Module is required for the Standard and Booklet Maker Finisher.
Xerox SquareFold Trimmer Module
Xerox Color 550/560/570 Printer
®
User Guide
Product Overview
2-5