3.6 Hints for Advanced Copying
Composite copying puts
1
information from two different
originals together on one copy.
First, make a copy from the first
original. Then place the second
original in the same direction as
the first one.
Pick up the copy of the first
2
original fed out onto the Copy
Tray and, holding it just as it has
been fed out, insert it into the
Multi Bypass port.
NOTE
Only plain paper can be used for making two-sided and composite
copies. (No transparencies can be used.)
If the paper is curled, remove the curl before inserting the paper into
the copier.
EP1030/EP1030F
st
1
Original
26
nd
2
Original
Rev. 1.x/22.05.02