Table of Contents
Advertisement
20
7. Hints for Advanced Copying
By using the Multi Bypass function, two-sided and composite (overlay) copies can be made. The
procedures are shown below.
Two-Sided Copy
Two-Sided Copying
In order to copy the contents of two
1
originals onto the front and back of a
single sheet of copy paper, position the
first original and second original as shown
in the illustration. It is important that they
are positioned in the same direction.
st
1
Original
When the copy of the first original has
2
been fed onto the Copy Tray, turn it over
without changing the position of its
leading edge and insert it into the Multi
Bypass port.
NOTE
Only plain paper can be used for making two-sided and composite copies. (No transparencies can be used.)
If the paper is curled, remove the curl before inserting the paper into the copier.
C1159O125DA
nd
2
Original
C1159O038DA
C1159O038DA
C1159O039DA
Composite Copy
Composite Copying
Composite copying puts information from
1
two different originals together on one
copy. First, make a copy from the first
original. Then place the second original in
the same direction as the first one.
st
1
Original
Pick up the copy of the first original fed
2
out onto the Copy Tray and, holding it just
as it has been fed out, insert it into the
Multi Bypass port.
C1159O126DA
nd
2
Original
C1159O040DA
C1159O041DA
Hide quick links:
Advertisement
Table of Contents
