Making Copies - Minolta EP1030 User Manual

3.1 Making Copies

3.1

Making Copies

The basic copy made is one that is the same size (100%) as the original.
In this procedure, the copy is positioned (Step 1), the number of copies is
set (Step 3), the Start Key is pressed (Step 4) and a copy is made that has
the same size of paper as the original.
* (In the initial mode, auto exposure has already been selected.)
The section shown by the arrow
adjustments to the image density of the copy.
1 Position the original.
Open the cover and place the
original face down on the glass.
(See page 18.)
2 [Only for units equipped with the
Semi-automatic Document
Handler (SDH)]
Place the original in the SDH.
(See page 19.)
3 To change image density
Use the Exposure Control Keys
46 to adjust image density.
(See page 22.)
EP1030/EP1030F
shows how and when to make
16 Rev. 1.x/22.05.02