Copier Does Not Work Properly - Minolta EP1030 User Manual

6.2 Copier Does Not Work Properly

6.2 Copier Does Not Work Properly
Problem
Nothing
displayed on the
Control Panel.
Copying does
not start when
the Start Key is
pressed.
No power to the
copier.
* If the above steps do not correct the problem with the copier, turn the
Main Switch off, unplug the cord and contact your service
representative.
EP1030/1030F
Cause
The Auto Power Off
function has been
activated.
Is the LED in the Start
Key off?
Is there an error
display (J/E/C) on the
Control Panel?
Is the Front Door
closed?
Is the copier plugged
in?
Has a breaker in the
power supply gone
off?
64
Correction
Press the Main Switch to
turn the copier on.
The Copier is still warming
up. Wait a moment.
Take the necessary action
to correct the error
displayed. (See page 40.)
Make sure the Front Door
is securely closed.
Make sure the plug is
securely in the outlet.
Reset the breaker.
Rev. 1.x/22.05.02