3.4 Setting Image Density
3.4
Setting Image Density
The Exposure Control Keys 456 can be used to adjust the image
density of the copy. Selection can be made between auto exposure mode
and manual exposure mode to meet specific needs.
Auto Exposure Mode
The copier reads the image density of the original and automatically
adjusts the exposure level for optimum copy image density.
Press the 5 Key and the "A" will
1
light up.
Each time the 5 Key is
pressed, it will switch between
auto exposure mode and
manual exposure mode.
USEFUL TIP
The auto exposure mode automatically sets the copier for the best
copy image density.
The inital setting is auto exposure mode.
EP1030/EP1030F
22
Rev. 1.x/22.05.02