Default Manual Exposure Level Adjustment - Minolta EP1030 User Manual

4.4 Default Manual Exposure Level Adjustment

4.4

Default Manual Exposure Level Adjustment

The center density setting of the Default Manual Exposure Level
Adjustment can be set to one of nine settings. With copy density 5 as the
middle setting, decreasing the setting value lightens the density and
increasing the setting value darkens the density.
Use the main switch to turn off
1
the copier. While holding down
the Exposure Control Key 5,
turn on the copier. The copier
enters the Default Manual
Exposure Level Adjustment.
Press the Exposure Control
2
Keys 4 and 6 to select a
density setting.
3 Press the Start Key to print one
copy in order to check the
selected density.
EP1030/EP1030F
Copy density 1 (lightest)
Copy density 2 (lighter)
Copy density 3 (lighter)
Copy density 4 (lighter)
Copy density 5 - middle setting
Copy density 6 (darker)
Copy density 7 (darker)
Copy density 8 (darker)
Copy density 9 (darkest)
34 Rev. 1.x/22.05.02