5.5
E-Display
This display indicates that there is trouble during the charging process.
Copying cannot be performed at this time. Follow the procedure below to
reset the copier.
Resetting the Copier
Turn the Main Switch off and
1
then on to reset the copier.
If the "E" appears again, contact
your service representative.
Before Calling Your Service Representative
Before calling the service representative, note the code being displayed.
Example: E2
Once the service representative has been contacted, turn the Main Switch
off and unplug the power cord.
Rev. 1.x/22.05.02
Flashes alternately.
53
5.5 E-Display
EP1030/EP1030F