Spanning-Tree Port-Priority <0-240; Spanning-Tree Priority <0-61440 - Asus GIGAX 2024M Cli Manual

Command Mode Configure terminal mode
No/clear
Show
Default
Description
Example
10.35 spanning-tree port-priority <0-240>
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
Description
Example
10.36 spanning-tree priority <0-61440>
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
GigaX2024B/M L2 Managed Switch CLI Manual
No spanning-tree max-age
show spanning-tree port detail IFNAME
20 sec
Use the spanning-tree max-age configuration command on
the switch stack or standalone switch to set the spanning-tree
interval (sec) between messages the spanning tree receive.
ASUS(config)# spanning-tree max-age 20
spanning-tree port-priority <0-240>
port-priority
<0-240>
no spanning-tree port-priority
show spanning-tree port detail IFNAME
None or depends on ODM customer
Use the spanning-tree port-priority configuration command
on the switch stack or standalone switch to set the spanning-tree
the port priority between 0 and 240.
ASUS(config-if)# spanning-tree port-priority 128
spanning-tree priority <0-61440>
priority
<0-61440>
No spanning-tree priority
show spanning-tree port detail IFNAME
32768
the port priority
Number from 0 to 240, in increments of 16
the switch priority
valid range is 0 to 61440 in increments of
4096
47