GigaX2024B/M L2 Managed Switch CLI Manual
Default
Description
Example
10.28 spanning-tree (enable|disable)
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Example
10.29 spanning-tree cost <1-200000000>
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
Description
Example
10.30 spanning-tree edge-port
44
To show spanning-tree summary.
ASUS# show spanning-tree interface fa1/0/1
spanning-tree (enable|disable)
disable ->
globally for the switch
enable ->
globally for the switch
spanning-tree disable
show spanning-tree active
Enable
Enable/Disable the spanning tree
ASUS(config)# spanning-tree enable
spanning-tree cost <1-200000000>
cost
<1-200000000>
no spanning-tree cost
show spanning-tree port detail IFNAME
19
Use the spanning-tree cost configuration command on the
switch stack or standalone switch to set the spanning-tree path
cost.
ASUS(config-if)#spanning-tree cost 128
disables the Spanning Tree algorithm
enables the Spanning Tree algorithm
the path cost
Valid range is from 1 to 200,000,000