Spanning-Tree Link-Type (Auto|Point-To-Point|Shared); Spanning-Tree Max-Age <6-40 - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
No/clear
Show
Default
Description
Example
10.33 spanning-tree link-type (auto|point-to-
point|shared)
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
Description
Example
10.34 spanning-tree max-age <6-40>
Syntax
Parameters
46
No spanning-tree hello time
show spanning-tree port detail IFNAME
2 sec
Use the spanning-tree cost configuration command on the
switch stack or standalone switch to set the hello time to send
hello BPDUs.
ASUS(config)# spanning-tree hello time 2

spanning-tree link-type (auto|point-to-point|shared)

link-type
auto ->
point-to-point ->
shared ->
no spanning-tree link-type
show spanning-tree port detail IFNAME
None or depends on ODM customer
Use the spanning-tree cost configuration command on the
switch stack or standalone switch to set the spanning-tree link
type for the Rapid Spanning Tree
ASUS(config-if)# spanning-tree link-type auto
spanning-tree max-age <6-40>
max-age
<6-40>
the link type for the Rapid Spanning Tree
automatically determines if the interface is
attached to a point-to-point link or to shared
media
a connection to exactly one other bridge
a connection to two or more bridges
the interval (sec) between messages the
spanning tree receives from the root switch
Valid range is 6~40 secs