Command Mode Configure terminal mode
No/clear
Show
Default
Description
Examples
13.121
(deny|permit) icmp host IPADDR host IPADDR
<0-255> [IFNAME]
Syntax
Parameters
GigaX2024B/M L2 Managed Switch CLI Manual
IPADDR
MASK
<0-255>
[IFNAME]
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
host IPADDR IPADDR MASK <0-255> [IFNAME]
Show acces-lists [number|name]
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
ASUS(config)#access-list 100 permit icmp host 10.0.0.1 10.0.0.4
0.0.0.0 1
access-list (<100-199>|<2000-2699>)
access-list (<100-199>|<2000-2699>) (deny|permit) icmp host
IPADDR host IPADDR <0-255> [IFNAME]
Access-list
<100-199>
<2000-2699>
range)
permit->
deny->
Icmp->
.host
IPADDR
.host
IPADDR
<0-255>
destination address
destination wildcard bits
ICMP message type
Egress interface name
Add an access list entry
Extended IP access-list number
Extended IP access-list number (expanded
Specify packets to forward
Specify packets to reject.
Internet Control Message Protocol
A single Source host
Source address
A single destination host
Destination address
ICMP message type
187