Dot1X Guest-Vlan <1-3000; Dot1X Max-Req <1-10 - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
Command Mode Interface mode
No/clear
Show
Default
Description
Example
6. 802.1x:
6.1 dot1x guest-vlan <1-3000>
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
Description
Example
6.2 dot1x max-req <1-10>
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
16
switchport trunk allowed vlan remove VLANLIST
show vlan [VLANID]
None or depends on ODM customer
Use the switchport trunk allowed vlan configuration command
on the switch stack or standalone switch to add or remove the
allowed VLANs that can receive and send traffic on this interface
in tagged format when in trunking mode
ASUS(config-if)# switchport trunk allowed vlan add 2-20
dot1x guest-vlan <1-3000>
<1-3000> valid vlan-id range is from 1 to 3000
no dot1x guest-vlan
show dot1x all / show dot1x interface IFNAME
No default guest vlan
Use the dot1x guest-vlan interface configuration command
on the switch stack or on a standalone switch to specify an
active VLAN as an 802.1X guest VLAN. Use the no form of this
command to return to the default setting.
ASUS(config-if)#dot1x guest-vlan 2
dot1x max-req <1-10>
<1-10> max-req times ; valid values are from 1 to 10
no dot1x max-req
show dot1x all