GigaX2024B/M L2 Managed Switch CLI Manual
Command Mode Configure terminal mode
No/clear
show
Default
Description
Example
3.3
show aggregation-link group [GROUPID]
GX2024B GROUPID range is 1-6
Syntax
Parameters
Command Mode Privileged EXEC mode
Default
Description
Example
4.
GVRP
4.1
clear gvrp statistics [IFNAME]
Syntax
Parameters
Command Mode Configure terminal mode
8
dst-ip ->
src-dst-ip ->
show aggregation-link group <1-32>
None or depends on ODM customer
Use the aggregation-link trunk group configuration command
on the switch stack or standalone switch to configure trunk
load balancing by using source-based or destination-based
forwarding methods.
ASUS(config)# aggregation-link group 1 load-balance src-mac
show aggregation-link group [GROUPID]
aggregation-link
group
[GROUPID]
To show aggregation-link trunk status.
ASUS# show aggregation-link group 1
clear gvrp statistics [IFNAME]
[IFNAME] Interface's name, ex: fastethernet1/0/1 or
gigabitethernet1/0/26
Destination IP address.
Source and Destination IP address.
static trunk aggregation link information
Trunk mode
1-32