GigaX2024B/M L2 Managed Switch CLI Manual
15.19 line loopback
Syntax
Parameters
Command Mode Interface mode
No/clear
Show
Default
Description
Examples
16. DHCP Client:
16.1 ip dhcp client
Syntax
Parameters
Command Mode Interface mode
Default
Description
Examples
16.2 no ip dhcp client
Syntax
Parameters
Command Mode Interface mode
Default
Description
Examples
202
Line loopback
no line loopback
Enable or depends on ODM customer
Use the line loopback command on the switch stack or
standalone switch to detect loopback of the port.
ASUS(config-if)#no line loopback
ip dhcp client
Start dhcp client
ASUS(config-if)#ip dhcp client
no ip dhcp client
Stop dhcp client
ASUS(config-if)# no ip dhcp client