Table of Contents
Advertisement
Example
10.2 mac-address-table aging-time TIMEVALUE
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Example
10.3 no mac-address-table aging-time
Syntax
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
GigaX2024B/M L2 Managed Switch CLI Manual
database.
ASUS(config)# clear mac-address-table dynamic vlan 1
mac-address-table aging-time TIMEVALUE
aging-time
remains in the MAC address table
TIMEVALUE
no mac-address-table aging-time
show mac-address-table aging-time
The default is 300 seconds.
Use the mac-address-table aging-time configuration command
on the switch stack or on a standalone switch to set the length
of time that a dynamic entry remains in the MAC address table
after the entry is used or updated.
The real aging-time is the triple of the command input radix
number.
ASUS(config)# mac-address-table aging-time 300
no mac-address-table aging-time
aging-time
remains in the MAC address table
Use the no mac-address-table aging-time configuration
command on the switch stack or on a standalone switch to
disable dynamic entry remains in the MAC address table after
the entry is used or updated.
the length of time that a dynamic entry
Aging time in seconds (10~1000000)
the length of time that a dynamic entry
33
Advertisement
Table of Contents
