Show Mac-Address-Table Multicast - Asus GIGAX 2024M Cli Manual

GigaX2024B/M L2 Managed Switch CLI Manual
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
Description
Example

10.8 show mac-address-table multicast

Syntax
Parameters
Command Mode Privileged EXEC mode
Default
Description
Example
36
interface IFLIST COS_DEST
multicast
MACADDR
(multicast) to the address table
vlan
VLANID
interface
IFLIST
COS_DEST
No static addresses are configured.
Use the no mac-address-table multicast configuration command
on the switch stack or on a standalone switch to remove
multicast static port to the MAC address table.
ASUS(config)# no mac-address-table multicast 0100.5e0a.0a0a
vlan 1 interface fa1/0/2-5 3
show mac-address-table multicast
None or depends on ODM customer
Use the show mac-address-table multicast user EXEC
command to display the Layer 2 multicast entries for all VLANs.
Use the command in privileged EXEC mode to display specific
multicast entries.
ASUS# show mac-address-table multicast
Multicast
Destination MAC address xxxx.xxxx.xxxx
Vlan
Valid range is 1 ~ 3000
the specified interface
Interface's name list, ex: fa1/0/1-12
Cos priority